Imprimer

Votre recherche pour: Industrial+Physics


15 488  les résultats ont été trouvés

SearchResultCount:"15488"

Sort Results

Vue liste Vue simple

Évaluez le résultat de cette recherche

Numéro de catalogue: (SIMELD3020)
Fournisseur: Industrial Physics
Description: Pictorial standard book with rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings. Also called 'Swedish Blast Degrees' or Sa-standards). The original visual standard. It shows the degree of cleanliness of four different levels of rusted steel cleaned by grit blasting, hand/power tool and flame cleaning.
UOM: 1 * 1 ST


Fournisseur: FRISTADS KANSAS
Description: This polo shirt is made of cool dry fibre (100% polyester) which transports perspiration away from the body. Perfect for physical activities.

Fournisseur: Industrial Physics
Description: Spiral type applicator with a film width of 250 mm and available in ranges from 4 to 200 μm. Ideal for application of film onto thin materials, such as sheets or plastic. Also works on flexible substrates, and with motorised film applicators. The high grade stainless steel will not be affected by acid and base elements.

Fournisseur: Industrial Physics
Description: Cylindrical film applicator with four application sides for applying paint films of four different predefined thicknesses in film width 60 or 80 mm. Suitable for applying a host of different products onto flat and relatively solid substrates. Made from high grade stainless steel, the film applicator will not be affected by acid or base elements.

Numéro de catalogue: (SIMEHI9813)
Fournisseur: Industrial Physics
Description: The portable combo waterproof tester offer high accuracy pH, conductivity/TDS and temperature measurements in a single tester.
UOM: 1 * 1 ST


Fournisseur: Industrial Physics
Description: Multi-functional film applicator with 4 application sides for applying paint films of 4 different predefined thicknesses. The applicators are available in film widths of 60, 80 mm and one side of the applicator is supplied with a guidance support for straight application. Made from high grade stainless steel, the multi-functional film applicator will not be affected by acid or base elements.

Fournisseur: Showa
Description: Ces gants en butyle offrent une résistance supérieure aux acides corrosifs et sont parfaitement adaptés à la manipulation de cétones et d'esters. Le caoutchouc synthétique fournit une résistance élevée aux gaz et aux vapeurs d'eau, mais ne présente pas la résistance physique du caoutchouc naturel.

Fournisseur: Industrial Physics
Description: Prismatic film applicator with four application sides for applying paint films of four different predefined thicknesses. The prism applicators are available in film widths of 50, 75, 80 and 100 mm and are suitable for applying a host of different products onto flat and relatively solid substrates. Made from high grade stainless steel, the prismatic film applicator will not be affected by acid or base elements.

Fournisseur: Industrial Physics
Description: Bird-type film applicators feature one flat edge and one application side for applying a pre-defined coating thickness. Bird-type applicator single gap is available in film width 50 and 75 mm and can be customised for applying a host of different products onto flat and relatively solid substrates. All Bird-type film applicators are made from high grade stainless steel and are not affected by acid or base elements.

Numéro de catalogue: (SIMELD9200)
Fournisseur: Industrial Physics
Description: Cet instrument est un testeur d'adhérence hydraulique léger facile à utiliser, qui applique un niveau croissant de force d'étirement sur un plot fixé à la surface de test en tournant simplement la poignée. La tête d'essai d'adhérence est équipée de pieds ajustables qui garantissent que la force d'étirement est toujours appliquée à 90º sur le revêtement, même sur des surfaces de substrats irrégulières. L'ajustage automatique fournit des résultats extrêmement précis et de résultats de test d'adhérence reproductibles.
UOM: 1 * 1 ST


Numéro de catalogue: (SIMESP7310)
Fournisseur: Industrial Physics
Description: TQC Bresle kit is a chloride test kit that complies with the ISO 8502-6 and ISO 8502-9 standards. The Bresle method is designed to to assess the level of soluble salts using a Bresle patch or Bresle sampler, distilled water and a conductivity meter. The conductivity is mainly directly proportional to the concentration of dissolved chloride ions in the solution. The kit includes all the necessary equipment to execute a Bresle test that will indicate the contamination of soluble salts on blast-cleaned surfaces prior to coating. Included is a conductivity gauge used for the assessment of soluble salt ions as chlorides, sulphates and nitrates.
UOM: 1 * 1 KIT


Numéro de catalogue: (SIMELD3059)
Fournisseur: Industrial Physics
Description: This pictorial standard shows two uncoated, rusted steel surfaces (Conditions C and D) before and after wet abrasive blast cleaning. Photographs illustrate two degrees of cleaning (WAB 6 and WAB 10) for each initial condition with additional photos that depict the appearance of light, moderate, and heavy flash rust after cleaning. Also contains a written guide to the use of reference photographs and additional explanatory notes. Cleanliness requirements for conditions depicted are defined by the joint SSPC/NACE surface preparation specifications for commercial (SP 6/NACE 3) and near-white blast cleaning (SP 10/NACE 2). Photos of commercial and near white surfaces achieved by dry abrasive blast cleaning can be found in SSPC-VIS 1.
UOM: 1 * 1 ST


Numéro de catalogue: (SIMELD3057)
Fournisseur: Industrial Physics
Description: SSPC-VIS 3 pictorial surface standard contains a series of 43 full-colour reference photographs to be used as a supplement to the SSPC standards for hand and power tool cleaned steel. Shows a total of seven different steel surfaces (four uncoated and three previously coated) before and after hand tool cleaning (SP 2), power tool cleaning with power wire brushes and sanding discs (SP 3), power tool cleaning to bare metal (SP 11), and commercial grade power tool cleaning (SP 15). It also contains pictures of SP 11 surfaces with a restored profile, a revised guide to the use of reference photographs, a new table of standards and conditions depicted and additional explanatory notes.
UOM: 1 * 1 ST


Fournisseur: Merck
Description: Cuprizone (Bis(cyclohexanone)oxaldihydrazone) is a physically unstable compound and is a well-known neurotoxic agent.

Fournisseur: GLASWARENFABRIK KARL HECHT
Description: Matériel pédagogique, Accessories, Application: Physique, Water decomposer, only the glass details

Numéro de catalogue: (41694.AE)
Fournisseur: Thermo Fisher Scientific
Description: Physical Form: Liquid
MDL No.: MFCD00144813
UOM: 1 * 100 mL

MSMD Certificats


Appel de prix
Le stock de cet article est limité mais peut être disponible dans un entrepôt proche de vous. Merci de vous assurer que vous êtes connecté sur le site afin que le stock disponible soit affiché. Si l'call est toujours affiché et vous avez besoin d'aide, s'il vous plaît appelez-nous au 016 385 011
Le stock de cet article est limité mais peut être disponible dans un entrepôt proche de vous. Merci de vous assurer que vous êtes connecté sur le site afin que le stock disponible soit affiché. Si l'call est toujours affiché et vous avez besoin d'aide, s'il vous plaît appelez-nous au 016 385 011
Ces articles ne peuvent être ajoutés au Panier. Veuillez contacter votre service client ou envoyer un e-mail à vwr.be@vwr.com
Une documentation supplémentaire peut être nécessaire pour l'achat de cet article. Un représentant de VWR vous contactera si nécessaire.
Ce produit a été bloqué par votre organisation. Contacter votre service d'achat pour plus d'informations.
Le produit original n'est plus disponible. Le remplacement représenté est disponible
Les produits marqués de ce symbole ne seront bientôt plus disponibles - vente jusqu'à épuisement de stock. Des alternatives peuvent être disponibles en recherchant le code article VWR indiqué ci-dessus. Si vous avez besoin d'une assistance supplémentaire, veuillez contacter notre Service Clientèle au 016 385 011.
177 - 192 of 15 488
no targeter for Bottom