Votre recherche pour: Industrial Physics

Numéro de catalogue: (SIMESP1895)

Fournisseur: Industrial Physics

Description: Ces testeurs d'impacts sont utilisés afin de déterminer la résistance aux chocs et la flexibilité des matériaux.

UOM: 1 * 1 ST

Promotion

Fournisseur: Industrial Physics

Description: Nylon brush for cross cut adhesion test

Fournisseur: Industrial Physics

Description: Spare Karsten tube, vertical

Numéro de catalogue: (SIMERV2100)

Fournisseur: Industrial Physics

Description: Simple hand-held digital thermo/hygrometer.

UOM: 1 * 1 ST

Promotion

Numéro de catalogue: (649-0037)

Fournisseur: Industrial Physics

Description: Ce tachymètre numérique est conçu pour les mesures de contact et sans contact.

UOM: 1 * 1 ST

Promotion

Numéro de catalogue: (SIMELI0010)

Fournisseur: Industrial Physics

Description: The MaxiLigno are equipped with the latest technology for precision and easy handling.

UOM: 1 * 1 ST

Promotion

Numéro de catalogue: (SIMELD3059)

Fournisseur: Industrial Physics

Description: This pictorial standard shows two uncoated, rusted steel surfaces (Conditions C and D) before and after wet abrasive blast cleaning. Photographs illustrate two degrees of cleaning (WAB 6 and WAB 10) for each initial condition with additional photos that depict the appearance of light, moderate, and heavy flash rust after cleaning. Also contains a written guide to the use of reference photographs and additional explanatory notes. Cleanliness requirements for conditions depicted are defined by the joint SSPC/NACE surface preparation specifications for commercial (SP 6/NACE 3) and near-white blast cleaning (SP 10/NACE 2). Photos of commercial and near white surfaces achieved by dry abrasive blast cleaning can be found in SSPC-VIS 1.

UOM: 1 * 1 ST

Promotion

Fournisseur: Industrial Physics

Description: This apparatus is designed to detect of coating porosity in dielectric (insulation type) coatings on conductive substrates, including concrete.

Fournisseur: Industrial Physics

Description: Cylindrical film applicator with four application sides for applying paint films of four different predefined thicknesses in film width 60 or 80 mm. Suitable for applying a host of different products onto flat and relatively solid substrates. Made from high grade stainless steel, the film applicator will not be affected by acid or base elements.

Numéro de catalogue: (SIMELD9330)

Fournisseur: Industrial Physics

Description: This automatic adhesion tester measures the adhesion of coatings applied on metal, wood, concrete and similar substrates.

UOM: 1 * 1 ST

Promotion

Fournisseur: Industrial Physics

Description: The Automatic Film Applicator Standard provides a reliable basis to apply coating films to test charts, panels or foils in a uniform and reproducible way in order to eliminate variations caused by human factors.

Numéro de catalogue: (SIMELI0055)

Fournisseur: Industrial Physics

Description: This high precision destructive hygrometer is designed for applications in concrete, sand cement, and other construction materials. The water present in the sample chemically reacts with calcium carbide produces pressure in the vessel, which is proportional to the residual moisture content.

UOM: 1 * 1 ST

Promotion

Fournisseur: Industrial Physics

Description: Ces étalons en métal se composent d'un set de quatre plaques d'étalonnage.

Fournisseur: Industrial Physics

Description: Les jauges de revêtement électroniques utilisent les principes des courants magnétiques et des courants de Foucault pour mesurer l'épaisseur de couche sur les métaux ferreux et non ferreux avec toutes les sondes PosiTector 6000, 200, DPM, UTG, RTR et SPG.

Fournisseur: Industrial Physics

Description: Bird-type film applicators feature one flat edge and one application side for applying a pre-defined coating thickness. Bird-type applicator single gap is available in film width 50 and 75 mm and can be customised for applying a host of different products onto flat and relatively solid substrates. All Bird-type film applicators are made from high grade stainless steel and are not affected by acid or base elements.

Numéro de catalogue: (SIMESP1560)

Fournisseur: Industrial Physics

Description: Jauge équipée de deux pointes: Une pour la rugosité de la surface et l'autre pour l'épaisseur du revêtement.

UOM: 1 * 1 ST

Promotion