Votre recherche pour: VICI JOUR RESEARCH

Numéro de catalogue: (JOURJR-S-40008)

Fournisseur: VICI JOUR RESEARCH

Description: O-ring, FEP coated, GL45 thread

UOM: 1 * 1 ST

Promotion

Fournisseur: VICI JOUR RESEARCH

Description: Filtre en ligne, PEEK, Cdt: 1 SET

Fournisseur: VICI JOUR RESEARCH

Description: GL 45 safety caps seal to the bottle with an O-ring (EPDM) which is resistant to commonly used HPLC solvents. If improved chemical resistance is required (e.g. for halogenated hydrocarbons), order an FEP-coated O-ring separately.

Fournisseur: VICI JOUR RESEARCH

Description: Connectors for low pressure applications are machined from PEEK.

Fournisseur: VICI JOUR RESEARCH

Description: These sample loops are made from PEEK tubing and fittings. Mechanically strong, chemically inert polymer ideal for HPLC applications. Softener-free polyethylene caps are used to avoid contamination of the tubing.

Numéro de catalogue: (554-1103)

Fournisseur: VICI JOUR RESEARCH

Description: This is the ideal tool for cutting ¹/₁₆ and ¹/₈" stainless steel tubing, leaving smooth, uniform cuts requiring a minimum of deburring and/or reaming.

UOM: 1 * 1 ST

Promotion

Numéro de catalogue: (JOURJR-9000-0001)

Fournisseur: VICI JOUR RESEARCH

Description: This cap can be used for helium sparging and for delivering HPLC mobile phases. The tubing ports are made so that you push the tubing through the hole, while 1/4-28 fittings provide the best connection. Unused ports can be plugged as required.

UOM: 1 * 1 ST

Promotion

Fournisseur: VICI JOUR RESEARCH

Description: These VICI Jour sample loops are made of high quality stainless steel 316.

Fournisseur: VICI JOUR RESEARCH

Description: Le filtre/barboteur dernière goutte combine la filtration et la diffusion. Le corps en PTFE contient un filtre à phase mobile et un élément de diffusion soit en acier inoxydable, soit en PTFE. La connexion vers le solvant se fait avec un tuyau de diamètre intérieur de 1,5; 2,2 ou 3,5 mm. Un raccord 1/4"-28 connecte une alimentation en hélium de 1/8" au barboteur de 10 µm. Les deux raccords sont en PEEK.

Numéro de catalogue: (554-1154)

Fournisseur: VICI JOUR RESEARCH

Description: Les raccords PEEK à tête hexagonale à ferrule intégrée sont pratiques à installer avec la clé ValvTool et à associer avec les bagues couleurs Color-it.

UOM: 1 * 6 ST

Promotion

Fournisseur: VICI JOUR RESEARCH

Description: VICI Jour PEEK unions are usable with most common HPLC solvents (organic and inorganic) without the risk of corrosion, metal contamination, or protein degradation that might occur with stainless steel. Connections to these PEEK unions can be made with any 10 to 32 fitting that uses a polymeric ferrule. The unions use the standardized Valco fitting details with smooth transition of the taper into the threaded part.

Fournisseur: VICI JOUR RESEARCH

Description: Ferrule, SS bushing, PEEK, For tubing ext.Ø: 1/16"

Fournisseur: VICI JOUR RESEARCH

Description: The air inlet valve has a check valve which blocks vapours of the solution in a bottle, preventing the vapours from escaping into the lab. The safety air outlet filter regulates the pressure during helium sparging.

Fournisseur: VICI JOUR RESEARCH

Description: PTFE

Fournisseur: VICI JOUR RESEARCH

Description: One-piece hex-head fittings made from PEEK are easy to use with the ValvTool and the Color-It Color-Coded Fingertight adapters. The 10-32 thread is suitable for standard high-pressure female connections. They are available both in a short and long version.

Numéro de catalogue: (JOURJR-793)

Fournisseur: VICI JOUR RESEARCH

Description: Replacement cutting wheel

UOM: 1 * 1 ST

Promotion