Votre recherche pour: LABCONCO

Numéro de catalogue: (LBCP110410021)

Fournisseur: LABCONCO

Description: The Protector® XStream® benchtop laboratory hoods are chemical resistant, fiberglass reinforced, composite liner and baffle. These are designed for general chemical applications.

UOM: 1 * 1 ST

Promotion

Fournisseur: LABCONCO

Description: FreeZone® bench top freeze dryers are designed for lyophilising light to moderate sample loads. The compact design is ideal for laboratories with limited floor space.

Numéro de catalogue: (LBCP9000732)

Fournisseur: LABCONCO

Description: WaterPro PS Polishing Stations deliver Type I, 18.2 megohm-cm water from the dispensing valve or optional dispensing gun (refer to descriptions for models that include gun) at a typical rate of 1.8 liters per minute depending on feedwater flow rate and pressure, and installed purification modules.

UOM: 1 * 1 ST

Promotion

Fournisseur: LABCONCO

Description: These PuriCare Open Access Transfer Station offer utmost efficiency for cage changing operations. Open access on two sides provides ample workspace for one or two operators to transfer animals from dirty cages to clean ones. This enclosure provides personnel, animal and environmental protection. HEPA-filtered vertical airflow provides Class 100 clean air in the work area to protect the animals from cross-contamination. At the same time, room air is drawn into grilles located on the work surface directly below the sash openings to ensure containment and protect the operator from allergens. All contaminated air inside the enclosure is filtered so that particulate-free air is exhausted back into the room, protecting the environment.

Fournisseur: LABCONCO

Description: Hard duct exhaust connector, Ø 15,2 cm, for connecting the glove box to ductwork attached to a remote blower (Requires ductwork and remote blower)

Fournisseur: LABCONCO

Description: These glove boxes with stainless steel liner provide inlet and outlet ULPA filtration and a leak-tight physical barrier to protect the operator from exposure to potentially hazardous materials and perform work with contamination-sensitive materials under vacuum or in an inert environment. Available with two or four glove ports (double version).

Numéro de catalogue: (LBCP3924200)

Fournisseur: LABCONCO

Description: Organic carbon filters for Protector® work stations with built-in blower, 5,4 kg, 457×914×250 mm, l×p×h ext.: mm mm

UOM: 1 * 1 ST

Promotion

Numéro de catalogue: (LBCP3505300)

Fournisseur: LABCONCO

Description: Beakers specifically designed for the Goldfisch Fat Extractor. Thick-walled borosilicate glass with flanged and ground tops to facilitate connection to the condenser.

UOM: 1 * 6 ST

Promotion

Numéro de catalogue: (LBCP3980422)

Fournisseur: LABCONCO

Description: Purifier HEPA filtered enclosures protect the user from agents that require biosafety level 1, 2 or 3 containment but no product protection. With ergonomic air foil with aerodynamic clean-sweep airflow openings; upper dilution air supply; zone-perforated rear baffle; side-entry air foils; and upper containment sash foil.

UOM: 1 * 1 ST

Promotion

Fournisseur: LABCONCO

Description: Pump inlet filter

Fournisseur: LABCONCO

Description: All RapidVap® Vertex™ Dry Block evaporators require a Block (not included). Blocks of solid aluminum include stainless steel handles to lift the block in and out of the evaporator. A 0,21" (0,5 cm) diameter port in the upper left hand corner of the block is provided for insertion of the temperature probe to monitor upper block temperature.

Fournisseur: LABCONCO

Description: This mobile system with or without heat boost combines the separate vacuum concentrator and cold trap components into one space-saving console and include casters for portability from laboratory to laboratory. A 12 to 13 mm rotor and solvent trap are also included. The interior can accommodate a vacuum pump — the only additional component necessary to begin processing.

Fournisseur: LABCONCO

Description: The refrigerated CentriVap centrifugal concentrator is designed to rapidly concentrate multiple small heat-sensitive samples, such as RNA and proteins, using centrifugal force, vacuum and controlled temperature. The concentrator combines a refrigeration system that cools to −4 °C with a heater that warms to 100 °C to achieve the user's desired set point temperatures. With an epoxy-coated aluminum chamber.

Fournisseur: LABCONCO

Description: Solid epoxy dished work surface, for 91,4 cm enclosures, 34 kg, 914×737×25,4 mm

Numéro de catalogue: (LBCP9910000)

Fournisseur: LABCONCO

Description: Armoire, Solvent vent kit consisting metal flexible hose Ø 38 mm, two hose clamps and slip fit outlet adapter

UOM: 1 * 1 ST

Promotion

Fournisseur: LABCONCO

Description: Accessoire pour lyophilisateur